lp:~ubuntu-core-dev/hw-detect/ubuntu

Branch merges

Propose for merging

No branches dependent on this one.

Related source package recipes

No recipes using this branch. (?)

Create packaging recipe

Related snap packages

Related bugs

Bug #87652: No sound in linux-image-2.6.20-8-powerpc G4	Medium	Won't Fix
Bug #237460: Root on iscsi is not supported	Undecided	Fix Released
Bug #251830: Mouseemu installed, not wanted	Undecided	Fix Released
Bug #279288: User interface exception request: Ask the user if they wish to activate dmraid arrays.	High	Fix Released
Bug #359915: uses "grep -w" which is not implemented in busybox	Low	Fix Released
Bug #857662: Should xenbus_probe_frontend be built-in?	Undecided	Invalid
Bug #1216043: driver-inject-disk: in target debs are installed before kernel has been	High	Fix Released
Bug #1317077: systemd-modules-load.service fails: /etc/modules contains nonexisting module "rtc"	Undecided	Fix Released
Bug #1546606: Unable to install Ubuntu 16.04 on Tuleta with multipath setup	High	Fix Released
Bug #1549456: multipath discovery failed during install due to missing udev properties defined by sg3-utils udev rules	Medium	Fix Released
Bug #1549504: multipath discovery failed during install due to LVM volumes locking individual paths	Medium	Fix Released
Bug #1549506: multipath discovery failed during install due to md arrays locking individual paths	Medium	Fix Released
Bug #1555904: opal-prd not installed by default on ppc64el systems	High	Fix Released
Bug #1559193: disk-detect/s390-dasd/s390-zfcp: Restructure installer and put DASD and FCP configuration into disk detection	Undecided	Fix Released

Link a bug report

Related blueprints

1515. By Dimitri John Ledkov on 2017-11-29

releasing package hw-detect version 1.117ubuntu5

1514. By Dimitri John Ledkov on 2017-11-29

hw-detect.sh: install opal-prd on OpenPOWER machines. LP: #1555904

1513. By Dimitri John Ledkov on 2017-11-29

releasing package hw-detect version 1.117ubuntu4

1512. By Mathieu Trudel-Lapierre on 2016-09-29

releasing package hw-detect version 1.117ubuntu3

1511. By Mathieu Trudel-Lapierre on 2016-09-29

releasing package hw-detect version 1.117ubuntu2

1510. By Dimitri John Ledkov on 2016-04-04

* Merge 1.117 from debian to pick up fix for LP: #1559193.
* Resynchronise with Debian. Remaining changes:
  - Add an 'archdetect-deb' package, containing /usr/bin/archdetect. Add
    an archdetect(1) manual page.
  - Add support for activating fakeraid devices with mdadm.
  - disk-detect.sh: Do not check the kernel command line for any option
    to enable dmraid support. If functional dmraid arrays are found, the
    user will be asked if they wish to activate them.
  - 'dmraid -c -s' changed its output format; cope with both old and new.
  - Make dmraid logging a bit neater.
  - Offer iSCSI targets for preseeding if partman-iscsi is available and
    no disk devices are found.
  - disk-detect.sh: Use mpath[a-z] now rather than mpath[0-9] to identify
    multipath devices and thus know to install partman-multipath.
  - disk-detect.sh: run update-dev after installing multipath and sg3.
  - debian/control: Depends on multipath-udeb (>= 0.5.0), which introduces
    the multipath device naming changes above.
  - Remove dm-emc from the multipath modules, since it's gone since
    2.6.27.
  - Improve checks for dm-* drivers being present to avoid relying on them
    being built as modules.
  - Bump question to load driver injection disk from medium to high, and
    raise driver-injection-disk package priority to standard. Thus the
    udeb will be loaded by default, but before installing any debs from
    the OEMDRV a confirmation question will be asked (default true, can be
    pre-seeded)
  - Drop priorities of a couple of ethdetect questions to medium.
  - Exit zero if you continue all the way through ethdetect's errors about
    having no network interfaces.
  - Remove FireWire Ethernet support.
  - disk-detect.sh: multipath: reload udev rules before re-add devices
    to guarantee all devices may get new udev properties
  - disk-detect.sh: multipath: deactivate LVM volumes before multipath
    discovery to unlock individual paths
  - disk-detect.sh: multipath: deactivate md arrays before multipath
    discovery to unlock individual paths
  - disk-detect.sh: use iscsi-start wrapper in partman-iscsi to be able to set
    a custom iSCSI initiatorName from the installer.
  - disk-detect.sh: load SCSI device handlers before SCSI low-level
    device drivers.
* Team upload
* Improve and split harddrive detection into DASD and SCSI dependency
  on s390x (Closes: #818586)
* Use HTTPS for Vcs-* URLs, and link to cgit rather than gitweb.
* Compress devnames-static.gz using "gzip -n" (Lintian).

1509. By Mathieu Trudel-Lapierre on 2016-03-21

releasing package hw-detect version 1.114ubuntu4

1508. By Mathieu Trudel-Lapierre on 2016-03-21

* disk-detect.sh: multipath: reload udev rules before re-add devices
  to guarantee all devices may get new udev properties (LP: #1549456)
* disk-detect.sh: multipath: deactivate LVM volumes before multipath
  discovery to unlock individual paths (LP: #1549504)
* disk-detect.sh: multipath: deactivate md arrays before multipath
  discovery to unlock individual paths (LP: #1549506)

1507. By Mathieu Trudel-Lapierre on 2016-03-01

releasing package hw-detect version 1.114ubuntu3

1506. By Mathieu Trudel-Lapierre on 2016-03-01

disk-detect.sh: use iscsi-start wrapper in partman-iscsi to be able to set
a custom iSCSI initiatorName from the installer.